Integrated treatment guided by RNA-seq-based endometrial receptivity assessment for infertility complicated by MEN1.

Background: Preimplantation genetic testing (PGT) serves as a tool to avoid genetic disorders in patients with known genetic conditions. However, once a selected embryo is transferred, implantation success is attained independent of embryo quality. Using PGT alone is unable to tackle implantation failure caused by endometrial receptivity (ER) abnormalities in these patients. Methods: We validated our newly developed RNA-seq-based ER test (rsERT) in a retrospective cohort study including 511 PGT cycles and reported experience in treating an infertile female patient complicated by multiple endocrine neoplasia type 1 (MEN1). Results: Significant improvement in the clinical pregnancy rate was found in the performed personalized embryo transfer (pET) group (CR, 69.7%; P = 0.035). In the rare MEN1 case, pET was done according to the prediction of the optimal time of window of implantation after unaffected blastocysts were obtained by PGT-M, which ultimately led to a healthy live birth. However, none of the mRNA variants identified in the patient showed a strong association with the MEN1 gene. Conclusions: Applying the new rsERT along with PGT improved ART outcomes and brought awareness of the importance of the ER examination in MEN1 infertile female patients. MEN1-induced endocrine disorder rather than MEN1 mutation contributes to the ER abnormality. Trial Registration: Reproductive Medicine Ethics Committee of Xiangya Hospital Registry No.: 2022010.

Hyperbaric oxygen therapy: a possible choice for patients with resistant thin endometrium during frozen embryo transfer treatments.

BACKGROUND: Thin endometrium is considered suboptimal for embryo implantation, leading to compromised pregnancy rates without effective therapies. While some studies have reported promoted endometrial growth after a period of hyperbaric oxygen therapy (HBOT) in patients with intrauterine adhesion, there have been no reports in patients with resistant thin endometrium. The purpose of this study was to investigate the impact of HBOT on endometrium growth and pregnancy outcomes in patients with resistant thin endometrium during frozen embryo transfer (FET) treatments. METHODS: This prospective pre-post cohort study was conducted at a university-affiliated assisted reproductive medical center between October 2021 and December 2022. Patients who had experienced at least one canceled transfer cycle due to a thin endometrium(< 7 mm) on the endometrium transformation day, despite the use of standard therapies as well as adjuvant therapies, were enrolled in the study. Patients were assigned voluntarily to either the HBOT group or the concurrent control group. The HBOT group received daily HBOT for at least 10 days during the proliferative phase, in addition to the routine endometrium preparation methods and the concurrent control group underwent cycles without HBOT. Propensity score matching (PSM) was used to ensure comparability between the groups. Both self-control and case-control comparisons were conducted. The primary outcome measured was endometrial thickness (ET) on the day of endometrium transformation. Secondary outcomes included intrauterine pregnancy rate (IPR), embryo implantation rate (IR), miscarriage rate, and others. RESULTS: Patients in the HBOT group demonstrated a significantly thicker endometrial thickness on the day of endometrium transformation after undergoing therapy (5.76 ± 1.66 vs. 6.57 ± 1.23, P = 0.002). This improvement was accompanied by a decreased rate of cycle cancellations. Baseline parameters and endometrial thickness were comparable between the HBOT group and the concurrent control group during the cycle. The IPR was similar in patients who received cleavage-stage embryos (0.0% vs. 6.7%, P = 1.00), but significantly higher in patients in the HBOT group who received blastocysts (53.8% vs. 18.2%, P = 0.017). CONCLUSIONS: A period of HBOT prior to endometrium transformation contributes to increased endometrial thickness and facilitates blastocyst implantation in patients with resistant thin endometrium during FET treatments. TRIAL REGISTRATION: The trial was registered on the Chinese Clinical Trial Registry (registration no. ChiCTR2300072831, retrospectively registered).

Robotic APTamer-Enabled Electrochemical Reader (RAPTER) System for Automated Aptamer-Mediated Electrochemical Analysis.

Electrochemical aptamer-based (E-AB) sensors using conformational change-induced electron transfer kinetics are sensitive, reagent-less, and cost-effective tools for molecular sensing. Current advances in this technology can allow continuous drug pharmacokinetic monitoring in living animals (Dauphin-Ducharme et al., ACS Sens 4(10):2832-2837, 2019; Idili et al., Chem Sci 10(35):8164-8170, 2019), as well as automated analysis of hormone pulsatility (Liang et al., Nat Commun 10(1):852, 2019). In this chapter, we provide the methodology for an automated E-AB conformational change-based robotic sensing platform. By using an open-source programmable robotic system, this method can be adapted to a wide range of experimental scenarios.

Disease-specific data processing: An intelligent digital platform for diabetes based on model prediction and data analysis utilizing big data technology.

Background: Artificial intelligence technology has become a mainstream trend in the development of medical informatization. Because of the complex structure and a large amount of medical data generated in the current medical informatization process, big data technology to assist doctors in scientific research and analysis and obtain high-value information has become indispensable for medical and scientific research. Methods: This study aims to discuss the architecture of diabetes intelligent digital platform by analyzing existing data mining methods and platform building experience in the medical field, using a large data platform building technology utilizing the Hadoop system, model prediction, and data processing analysis methods based on the principles of statistics and machine learning. We propose three major building mechanisms, namely the medical data integration and governance mechanism (DCM), data sharing and privacy protection mechanism (DPM), and medical application and medical research mechanism (MCM), to break down the barriers between traditional medical research and digital medical research. Additionally, we built an efficient and convenient intelligent diabetes model prediction and data analysis platform for clinical research. Results: Research results from this platform are currently applied to medical research at Shanghai T Hospital. In terms of performance, the platform runs smoothly and is capable of handling massive amounts of medical data in real-time. In terms of functions, data acquisition, cleaning, and mining are all integrated into the system. Through a simple and intuitive interface operation, medical and scientific research data can be processed and analyzed conveniently and quickly. Conclusions: The platform can serve as an auxiliary tool for medical personnel and promote the development of medical informatization and scientific research. Also, the platform may provide the opportunity to deliver evidence-based digital therapeutics and support digital healthcare services for future medicine.

An electrochemical aptamer-based biosensor targeting Plasmodium falciparum histidine-rich protein II for malaria diagnosis.

Malaria is an infectious disease caused by parasitic protozoans from the genus Plasmodium, with the species P. falciparum causing the highest number of deaths worldwide. Rapid diagnostic tests (RDTs) have become critical in the management of malaria, but current RDTs that detect P. falciparum are primarily antibody-based, which can have drawbacks in cost and robustness. Here, we report the development of an electrochemical aptamer-based (E-AB) biosensing alternative. Through selective evolution of ligands by exponential enrichment, we identify DNA aptamers that bind specifically to P. falciparum histidine-rich protein II (PfHRP2). The aptamer is modified with a methylene blue reporter and attached to a gold sensor surface for square-wave voltammetry interrogation. Through this method we are able to quantify PfHRP2 in human serum with an LOD of 3.73 nM. We further demonstrate the biosensor is stable in serum buffers and reusable for multiple detection rounds. These findings provide a promising alternative to conventional PfHRP2 detection for malaria diagnosis, while also expanding the capabilities of E-AB biosensors.

Measuring luteinising hormone pulsatility with a robotic aptamer-enabled electrochemical reader.

Normal reproductive functioning is critically dependent on pulsatile secretion of luteinising hormone (LH). Assessment of LH pulsatility is important for the clinical diagnosis of reproductive disorders, but current methods are hampered by frequent blood sampling coupled to expensive serial immunochemical analysis. Here, we report the development and application of a Robotic APTamer-enabled Electrochemical Reader (RAPTER) electrochemical analysis system to determine LH pulsatility. Through selective evolution of ligands by exponential enrichment (SELEX), we identify DNA aptamers that bind specifically to LH and not to related hormones. The aptamers are integrated into electrochemical aptamer-based (E-AB) sensors on a robotic platform. E-AB enables rapid, sensitive and repeatable determination of LH concentration profiles. Bayesian Spectrum Analysis is applied to determine LH pulsatility in three distinct patient cohorts. This technology has the potential to transform the clinical care of patients with reproductive disorders and could be developed to allow real-time in vivo hormone monitoring.

An aptamer-enabled DNA nanobox for protein sensing.

DNA nanostructures can show dynamic responses to molecular triggers for a wide variety of applications. While DNA sequence signal triggers are now well-established, there is a critical need for a broader diversity of molecular triggers to drive dynamic responses in DNA nanostructures. DNA aptamers are ideal; they can both seamlessly integrate into DNA nanostructure scaffolds and transduce molecular recognition into functional responses. Here, we report construction and optimization of a DNA origami nanobox locked by a pair of DNA double strands where one strand is a DNA aptamer targeting the malaria biomarker protein Plasmodium falciparum lactate dehydrogenase. The protein acts as the key which enables box opening. We observe highly specific protein-mediated box opening by both transmission electron microscopy and fluorescence. Aptamer-enabled DNA boxes have significant potential for enabling direct responses to proteins and other biomolecules in nanoscale diagnostics, drug delivery and sensing devices.

A portable microfluidic Aptamer-Tethered Enzyme Capture (APTEC) biosensor for malaria diagnosis.

There is a critical need for better biosensors for the detection and diagnosis of malaria. We previously developed a DNA aptamer that recognises the Plasmodium falciparum lactate dehydrogenase (PfLDH) enzyme with high sensitivity and specificity. The aptamer was integrated into an Aptamer-Tethered Enzyme Capture (APTEC) assay as a laboratory-based diagnostic approach. However, a portable equipment-free point-of-care aptamer-mediated biosensor could have a significant impact on malaria diagnosis in endemic regions. Here, we present a new concept for a malaria biosensor whereby aptamers are coated onto magnetic microbeads for magnet-guided capture, wash and detection of the biomarker. A biosensor incorporating three separate microfluidic chambers was designed to enable such magnet-guided equipment-free colorimetric detection of PfLDH. A series of microfluidic biosensor prototypes were optimised to lower rates of inter-chamber diffusion, increase sensitivity, and provide a method for point-of-care sample testing. The biosensor showed high sensitivity and specificity when detecting PfLDH using both in vitro cultured parasite samples and using clinical samples from malaria patients. The high performance of the biosensor provides a proof-of-principle for a portable biosensor that could be adaptable for a variety of aptamer-mediated diagnostic scenarios.

Aptamer-Mediated Protein Molecular Recognition Driving a DNA Tweezer Nanomachine.

Nucleic acid-mediated nanomachines have significant potential in biomedical applications but new approaches that link molecular recognition of proteins to change in nucleic acid structure and function are required. Here, a split DNA aptamer is integrated into G-quadruplex tweezers, which close in the presence of the malaria biomarker protein Plasmodium falciparum lactate dehydrogenase (PfLDH). Closing of the tweezers enables G-quadruplex hemin mediated peroxidase activity, which can be observed colorimetrically. The PfLDH aptamer is split within an asymmetric internal loop and incorporated into the tweezers maintaining aptamer binding capability. Spacing between the G-quadruplex structure and split aptamer, together with extent of complementarity, is found to be critical for optimization to enhance catalytic performance. The integrated split aptamer is observed to maintain the high specificity to Plasmodium falciparum lactate dehydrogenase of the parent aptamer. Split aptamer approaches have significant potential to functionalize nucleic acid nanostructures for protein molecular recognition.

Aptamer Affinity Maturation by Resampling and Microarray Selection.

Aptamers have significant potential as affinity reagents, but better approaches are critically needed to discover higher affinity nucleic acids to widen the scope for their diagnostic, therapeutic, and proteomic application. Here, we report aptamer affinity maturation, a novel aptamer enhancement technique, which combines bioinformatic resampling of aptamer sequence data and microarray selection to navigate the combinatorial chemistry binding landscape. Aptamer affinity maturation is shown to improve aptamer affinity by an order of magnitude in a single round. The novel aptamers exhibited significant adaptation, the complexity of which precludes discovery by other microarray based methods. Honing aptamer sequences using aptamer affinity maturation could help optimize a next generation of nucleic acid affinity reagents.

Oligonucleotide Functionalised Microbeads: Indispensable Tools for High-Throughput Aptamer Selection.

The functionalisation of microbeads with oligonucleotides has become an indispensable technique for high-throughput aptamer selection in SELEX protocols. In addition to simplifying the separation of binding and non-binding aptamer candidates, microbeads have facilitated the integration of other technologies such as emulsion PCR (ePCR) and Fluorescence Activated Cell Sorting (FACS) to high-throughput selection techniques. Within these systems, monoclonal aptamer microbeads can be individually generated and assayed to assess aptamer candidate fitness thereby helping eliminate stochastic effects which are common to classical SELEX techniques. Such techniques have given rise to aptamers with 1000 times greater binding affinities when compared to traditional SELEX. Another emerging technique is Fluorescence Activated Droplet Sorting (FADS) whereby selection does not rely on binding capture allowing evolution of a greater diversity of aptamer properties such as fluorescence or enzymatic activity. Within this review we explore examples and applications of oligonucleotide functionalised microbeads in aptamer selection and reflect upon new opportunities arising for aptamer science.